Product Description
Product Description How do I clean and sterilise the RapidCool™ lid? The digital lid should be cleaned in warm, soapy water. After cleaning, the lid should be sterilised by UV sterilisation or cold-water sterilisation. How do I sterilise the RapidCool™ base? You can do this via UV sterilisation, cold water sterilisation, steam sterilisation or in a dishwasher. Never steam sterilise in a microwave. How long does the insulator flask stay hot? The insulated flask will keep water above a safe temperature to make a feed for at least two hours, when pre-heated with boiling water first. The insulated flask works with the digital lid to show you with a red ‘Nuby’ that the water is still hot enough to kill any bacteria in your little one’s formula. Can I mix formula with the boiled water immediately or do I have to wait for the water to cool down to 70°C? No, you don’t have to wait! The freshly boiled water can and should be used immediately for the safest feed. The NHS guidelines state that the water should be no less than 70°C, but this does not mean that you must wait for it to reach this temperature first before mixing with formula. Mixing formula with freshly boiled water is the safest way to feed, as it ensures any harmful bacteria are eliminated! How do I know when the RapidCool™ is ready to use again? The RapidCool™ works by absorbing heat from hot liquids. After being exposed to heat, it will require a minimum of 3 hours before being ready to use again. The flask should feel cool to the touch. Manufacturer Contact Information Talbot's Family Products LLP, 13 Burford Way, Boldon Business Park, Boldon Colliery, Newcastle upon Tyne, NE35 9PZ. DC Pharm Calle Filadores, S/N - Nave 3, Olesa de Montserrat, 08640 Barcelona, Spain.
